A sump pump that is in desperate need of repair can be just as good as a new one. It is important to immediately call a sump expert when you are worried about the sump pump’s ability to work optimally or if it has already failed, as it could be the cause of your dangerously wet lower levels. A damaged sump pump may also leak mineral or other contaminants into your basement, further contaminating your home’s water supply. You must keep your basement sump pump and its filters clean to ensure that the bacteria and other organic pollutants do not become a health hazard.
Before calling a professional to assist you with your pump repair, it is advisable to test it for leaks using a wet pipe test to determine the extent of the damage. If you find out that your sump pump replacement needs to be done immediately, the best option will be to use a sump pump repair kit that you can purchase from a local hardware store. Such repair kits contain everything you need to repair your pump including the necessary tools and materials.
In most cases, however, there would still be a need to use new sump pump repair kits. These can be purchased from professional plumbing supplies stores or online. In the case of having to buy one from the internet, make sure that you choose an online retailer who delivers to your area and can offer some kind of money-back guarantee so that you can ensure your satisfaction with your new pump.
You can search for the best deals on your own but if you want to know for sure if you are buying the right product or not then it is better to have a professional check it out for you. A professional can also tell you about any possible complications in use that could prove to be harmful to you. This is because most often, they are equipped with the knowledge of the right plumbing tools and accessories to effectively deal with any plumbing problem in the home. It is also good to let them repair any damaged parts since you don’t want to risk your plumbing system by putting a hole in it. It is also advisable to inform them about any maintenance you plan to do to your sump pumps and your plumbing system as well so that they can guide you accordingly.
Most homeowners tend to ignore the presence of sump pump repair tools in their homes because they are afraid that such tools might be dangerous. The fact is however that such tools are actually very safe if used properly. For example, using a screwdriver to remove the cover of the drainage hole in the sump pit and inserting the pointed tip into the pipe leads to no damage or harm at all. If the damage is major, however, professional help is required. Therefore, never hesitate to hire expert Plumbers in The Colony TX to check out your plumbing system whether it is leaking due to flooding, a faulty waterproofing system, or some other reason.
One of the main tasks of the professionals is to check for leaks and cracks in the walls surrounding the sump pit. While doing so, they use high-pressure water to carefully inspect the walls. They may even need to dislodge plaster to find the exact spot where the leak or crack is. Once they find it, they then pull out the broken section of the pipe and use pliers to remove the float assembly from the pipe. The float serves as the device that allows the pump to float above the area of the leak or crack so that the water flowing out can reach the drainage hole.
Nowadays, most homeowners have chosen to have waterproofing systems installed in their homes. This not only prevents flooding but also keeps the water away from the house’s interior, where it belongs. However, these systems are not perfect and there are chances of them getting damaged over time. Over the years, due to continuous usage, some parts of the float might get corroded, thus allowing dirt and even rust to set inside. This can then cause the water tank to overflow causing flooding and sump pump repair.
Before going for any sump pump repair, you must first ensure that the problem is detected early before the situation worsens. For this, you can make use of an electronic device known as an ultrasonic probe. It works at a depth of around 2 feet and can easily detect any cracks and leakage around the sump pit. If the leak is detected, you can start replacing the damaged parts using the plumbers’ hose and the screwdriver.